Product Description
This waterproof, 6-way pneumatic-electric slip ring rotary joint is a stainless steel hybrid slip ring designed for rotating equipment requiring simultaneous transmission of pneumatic and low-voltage control signals. Its rugged stainless steel housing and IP65 rating ensure stable operation in dusty and humid industrial environments. It integrates six M5 pneumatic channels and four 100mA current channels, using RVV4 cables for a compact design. Suitable for 24V low-voltage systems and with a maximum speed of 50 RPM, it is ideal for applications such as automated rotary fixtures and small rotary tables.
Key Features
1. Rugged and durable for harsh environments
The stainless steel housing offers excellent corrosion resistance and mechanical strength.
With a high IP65 protection rating, it is completely protected against dust intrusion and low-pressure water jets from any direction, making it suitable for dusty and humid industrial environments.
2. Hybrid pneumatic and electrical integration
Innovatively integrates six M5 pneumatic channels and four 100mA rated electrical channels.
This enables simultaneous transmission of pneumatic and low-voltage electrical signals on the same rotary interface, simplifying the device structure.
3. Designed specifically for low-voltage and low-voltage control scenarios
The electrical system uses RVV 4-core cable for neat wiring.
With an operating voltage of less than 24V DC and a current of 100mA, it is designed for control signals, sensor power supply, or low-power devices, rather than high-power transmission.
4. Robust dynamic performance
Supporting rotational speeds up to 50 RPM, it meets the needs of most low-speed, high-reliability applications.
Technical Parameters
| Parameter |
Parameter value |
| Dielectric strength |
200VCA@50Hz,60s |
| Insulation resistance |
≥100MΩ/200VDC |
| Dynamic resistance change value |
＜10mΩ |
| Rated voltage |
0～24VDC/VAC |
| Wire Specifications |
Teflon wire (adjustable based on load conditions) |
| Wire length |
Default 300mm (customizable) |
| Operating temperature |
-30℃～+80℃ |
| Protection level |
IP65
|
Application Scenarios
This product, with its unique "pneumatic-electric hybrid" design and "high-protection stainless steel," is primarily targeted at precision industrial applications requiring corrosion resistance, sealing, and hybrid power transmission.
1. Industrial Automation and Intelligent Manufacturing
Applications: Rotary pneumatic grippers, small rotary tables, and robotic end-of-line actuators (EOATs) in automated production lines.
Solution: Provides a rotary air source (driving the cylinder) for grippers while simultaneously transmitting sensor (such as position sensing) or control signals (such as vacuum cup switches) for precise gripping and placement.
2. Food, Pharmaceutical, and Packaging Machinery
Applications: Rotary filling equipment, rotary sealing mechanisms in packaging machinery, and rotary platforms in pharmaceutical equipment.
Solution: Stainless steel meets hygiene standards and is easy to clean and disinfect; IP65 protection withstands washdown environments; and hybrid transmission meets the needs of integrated drive and pneumatic control.
3. Semiconductor and Precision Electronics Manufacturing
Applications: Wafer handling equipment and rotary units in precision test and sorting tables. Solving Needs: Providing reliable rotary connections in clean environments, transmitting weak control signals (100mA level) and clean air sources, while avoiding contamination and signal interference.
4. Special Vehicles and Outdoor Equipment
Applications: Rotating monitoring platforms for construction machinery and rotary sensors on special vehicles.
Solving Needs: The stainless steel housing and IP65 protection withstand harsh outdoor conditions of dust, humidity, and corrosive environments.
